Pacific Tek Power Vacs in Action.Vacuum excavating holes for potholing using the Pacific Tek PV-100, PV-250, PV-500DHO, PV-150 pick up mount vacuum excavators, using just the ABS digging Wand, using high pressure water, and using compressed air.
Valve Exerciser by Pacific Tek also called a Valve operator
Demonstration of a truck mounted valve operator with the Swinger attachment for 180 degree rotation and pull out from truck is 30 inches. Torque capacity is 0-2500 ft lbs which can be pre set to any torque and it will automatically stop at the pre determined torque the operator selects. This unit also has a PV-100 gallon vac for valve can clean out. Optional data collection and GIS program with GPS can be included with this unit.
PV-100 Power Vacuum with Pacific Tek I
Coredrill cutting 8 inch hole in concrete with Pacific Tek 100 gallon vac cleaning up sawing slurry and potholing a hole down two feet.
Potholing with Pacific Tek PV-350 Power Vac and a 4-16 inch Core Drill
Potholing 12 inch hole with Pacific Tek PV-350 vacuum excavator on Truck Mounted with 4-16 inch Pacific Tek CD-4-16 Core Drill.
Slurry Vacuum PV-350 Truck Mounted & 12 Inch Core Drill by Pacific-Tek
Pacific Tek Power Vac PV-350 truck mounted potholing 12 inch hole using a CD 4 through 16 inch Core Drill gas powered.
Valve Exercising Pacific-Tek PT-13 Long Reach Exercising a valve
Pacific-Tek PT-13 Long Reach Valve exerciser exercising a 8 inch valve in the middle of the street. This is a valve exercising machine used to open and close underground water valves. Valve exercising is becoming mandated to insure that valves will operate in an emergency. A valve exerciser can be portable or vehicle mounted. If you are interested in a Valve exerciser dont hesitate to call (800)884-555 or go to our webpage www.pacific-tek.com.
